Doors behind music?

by Roman aka jar

posted by roman, jarhead, kong

A music post following a music post?? - aight and that is good as music is the key ...



... to many doors - what music are you enjoying at the moment?
Hit the comments with it if you like - the jungle would love to hear your sound - sometimes when i am painting a lot there is always a little bit to less new music in my playlists and i would really look forward to your sound suggestions for some hardly needed change - just too make the keychain bigger :)

I choose one to be my favourite song suggestion from you and the one who suggested it will get a little jungle surprise on Monday or as soon as i have listened to them all - (seriously no idea on how many comments might drop in now)

Happy Painting!

PS: EBAY INFORMATION: Sending invoices later on this night as we got a guest tonight! Thanks for your patience - it'll be quick i'll promise!

Good Morning Music

by Mati

Posted by Mati/Badsmile/lil Orangutan:

Today, the old old school stuff. The Animals:



Have fun !

Riddle Raddle Tail

by Roman aka jar

posted by roman, jarhead, kong

Aloa.

Yeppa, there was one "smartass" (I just name him that as he did himself in the comments) lately who knew what is happening on this photo:


The right answer by the Maxican:

"Compared to the former pictures you added a tail to the demon, which now has to settle, so you built a construction to keep it in place?!"

Thanks for all your comments, I really had to laugh hard about them. Creative solutions presented by you. So, the demon has a tail now - i did create it from Magic Sculp, rolled it on baking paper and let it dry for about 1 hour before i tried to construct it to the model. After 1 hour Magic Sculp is still movable but already in the progress of getting hard. So I had to build the construction you see in the photo above to get the form i was looking for. Here are some normal shots again, you may click to enlarge them to see the full McGyvering going on there:













After the tail was dried out completly (i did wait a day) it stays in place and is already getting some paint on it:


So far from the Workbench - happy painting!
Best Wishes
Roman

Musica again ...

by Roman aka jar

posted by roman, jarhead, kong

I just have to post this as Raffa is showing me weird music continously over the last days and always says he is too scared to post it in the jungle - i always say there is nothing to be scared of when it comes to the jungle posts - so hope you enjoy :)

Step by Step – Hunter or Hunted

by Raffa

Posted by Raffa, Picster, Capuchin,...


Introduction

Finally... I had the time to create and write this big-ass article for you :)
I hope you will enjoy it and if you have any questions about details, just ask in the comments!

Aaaaand before you start reading it, remember the donation button, we put in a lot of work, effort and love into our articles and sometimes I have a feeling many people yell and want so much information, but not many are willing to give something back......

anyway, let's start!


Concept Phase
The idea and the concept for this project made through very many development steps, from a terminator and a tyranid in the 40k universe to a canal worker with many rats in the fantasy universe. In the end a elite, experienced rat hunting ogre mercenary came to my mind that, just as he does his everyday work, gets attacked by a worthy enemy....

It is one thing to paint a single miniature and it's a completely other thing to begin a complex project. There should be a rough idea of what will happen, how it should look etc. This planing phase is pretty wild in my case, ideas get born just the be thrown away 5 seconds later. I'm looking for inspiration, talking very much with my friends about it that bring new ideas to the project and in the end you have some kind of rough sketch inside your head.

At this point i want to give out a biiiiiiiiiiiig monkey hug to my brother in brushes, Roman that made my life more complicated with more and more ideas.

It's always a good idea to start a big project with some sketching, that helps to not lose your plan while creating the project

Construction of the Base

To create a project fitting to the rules of the Golden Demon i had to put the project on a 50x50mm gaming base. The first step was to cut out the inside of the base to get some depth. Afterwards i thought about it and maaybe this step was unnecessary but anyway....
In the next step i cut out a piece of plasticard with a size of 50x50mm which later gets put inside of the cut out gaming base.
On this piece of plasticard i started glueing my small bricks in 1:35 scale (manufactured by Juweela). I glued them on the plasticard with pvc glue.


The next step was to build up a anticlinal basement. To support the stairs i used a piece of balsa wood.

On the backside of the scene i wanted to give the impression that it was 'ripped' from ground earth.
To give this impression i cut out 2 pieces of plasticard to give a platform for the earth.
On this platform i glued some flower earth with plastic glue.

Watch out when you glue earth with super glue, sometimes it gives away hazardous vapors. Do it outside or with good ventilation and keep some distance with your face from the point of application!

On the front side I continued to build the stairs, to do this I glued the small bricks with superglue to create a stair like construction. Between the stairs I added more balsa wood to give the stairs some support. On the top of the basement I added some floor for the next level with more balsa wood.
For the small arch I used smaller bricks.

The floor for the actual scene was the created with small bricks. I layed the bricks our in a zig-zag like pattern to make it a little more interesting. Again they were just glued to the floor with super glue. Now I added some first details to the base like skulls (Games Workshop) and a railing (H0 railway accessory from Busch)

At the stairway I added some damage to the bricks with a scalpel and added a small barrel.
To add some more realism I used the remains of the destroyed bricks to add some debris to the corners of the stairs.

The wall in the first floor slowly started to grow, I just kept gluing bricks together with superglue to resemble a wall. On the picture you already see the imagined poses of the two miniatures.

A drain pipe was created from a piece of plastic tube and copper wire and was added to the wall.
To give it some more detail I used parts of old automatic wristwatches and pieces of plastic models.

A basecoat spray cap was cut and used for the big sewer opening which the skaven should jump through. After adjusting it's size I integrated it into the base and glued bricks to it.

The skaven was finally assembled and was fixed with Milliput where it was necessary like on the helmet and on the back. I added a pin to his foot to remove him for painting.
On most of my projects I add a pin to the foot to have the miniature seperated for painting, but to have the option to 'stick' the mini on the base to get a feel for the overall look.
Above the big sewer opening I added another sewer port. This part was from a plastic kit of a steam locomotive. The aluminium tubes on top got some dents and damage, the ends of the pipes were bull's-eyes from ship model making. I also added more damage to the brick wall.

I glued some pieces of cork, skeletons and a base of flower earth to the backside of the wall with super glue. Then I used Milliput to fill up the empty space between the cork pieces. I used a small stone to add some structure to the Milliput while it wasn't hard.

As the base was somehow a little too small for the ogre, I enlarged the floor with some balsa wood and small bricks.

On the backside I added more detail with more roots, earth and small stones. On the front side of the base I added some earth to the floor mixed with some loose bricks.
Some trash on the front and a small lantern bring the base to an end. Here you see the basecoated version.



Conversion
As the base is so far finished I can now start with the conversion of the ogre. Again I started with a sketch to bring the picture in my mind to the paper.

As you can see on the sketch, the ogre was supposed to pick his nose in boredom, but I changed my mind later to the kick-ass cigar smoking ogre version...

I started the conversion with a basic body from the Ogre Bulls box from Games Workshop.
The first step was to assemble, remove mold lines and change the belly of the ogre.
The fingers of the left hand were modified to be able to hold a cigar.



According to this theory I started with sculpting the belly using Pro Create mixed with 1/5 of Super Sculpey Firm to get a longer working time (this trick also works with Green Stuff instead of Pro Create and with Fimo instead of Super Sculpey). The clothing was added on the next day. The bag is from a plastic kit of 1:35 soldiers.

When sculpting on larger projects it's always a good idea to work in layers, start with the most inside layer (skin) and work to the outside (clothing, details).

As the ogre should resemble a mercenary I decided to give him some lansquenet style.
I made strips of Pro Create on baking paper and attached them to the cloting. I also sculpted a fitting cap with Pro Create. When the clothes were dry I sculpted the fingers and the cigar.
After everything was dry I sculpted the belts of the backpack/flamethrower tank with Milliput (Why not Pro Create? I don't know...). The barrel itself is a tin on I got as a gift from Roman.


After the belts were dry I cared about the gnoblar. The base model is the gnoblar that sits on the banner in the Ogre Bulls box. The legs of the gnoblar got cut off at the hip and after the glueing them to the body of the ogre I reattached the gnoblars body to the legs. The gap was closed with Milliput. On the sides of the flametank I attached parts of plastic kits like a part of a tank wheel.

The flamethrower was made from a piece of aluminum tube and the end of a Chaos Space Marine Heavy Bolter. The rings around the flamethrower were sculpted with Milliput. To create the hose that connects the flamethrower to the tank I rolled up a sausage of Milliput on backing paper and brought it into position after a small drying time (not completely dryed, just not so sticky).
After completely drying I could remove the hose again to sand it to perfect shape.
When I finished this step I created another smaller hose made from tin-solder and added it to the bigger hose with some fine thread.


After the conversion work was done I basecoated the ogre with a 2k basecoat.



Painting
The whole scene was painted in a zenithal lighting style, you can read more about this here.

The skin of the ogre was painted with a mix of Fortress Grey and Tallarn Flesh as a midtone.
After this I added some light by mixing Bleached Bone into the midtone.

For the shadows I added a little drop of Dark Angels Green, Codex Grey and Chaos Black to the midtone mix. The blendings were painted with many layers of thin glazes to get a nice result.
For the red parts of the skin like the nose, ears, ellbows, scars and cheeks I added a little bit of Terracotta (old GW color) to the color.
I added this color in glazes to get a smooth blending to the rest of the skin. Under the eyes I added a small glaze of Hawk Turqouise.

The beard shadow and the belly hair were painted with Uniform Grey (Vallejo).

I painted the inside of the mouth with a mix of Chaos Black and Tank Brown (Vallejo).
It's a good idea to paint the inside of the mouth right after the basecoat. It's hard to paint it at the end withouth painting on the finished skin.

The beard was painted with a mix of Blazing Orange and Codex Grey.

On the clothing I really tried to get some nice color contrast while not being to bright and colorful.
I got some inspiration on real lansquenet clothing and so in the end I used yellow and turquoise.
For the yellow I used a midtone of Iyaden Darksun. For the shadows I added Sepia Ink (Vallejo GC), the lights were painted with Rotting Flesh.

For the turquoise I used a mid tone of Hawk Turquoise, the shadows and lights were painted with Sepia Ink and Rotting Flesh, just like the yellow.

I did this to reduce the contrast between the two parts of the clothing and to bring both colors together to get a nice overall look which much contrast but without the colors biting each other.

After the big Surfaces I painted leather parts, wood and metal. For the leather I mainly used a basecoat of Graveyard Earth mixed with a variety of other brown colors.
I used Tank Brown to bring in some shadows and Bleached Bone for the highlights.

The metal parts were given a base coat of Tin Bitz and depending on the type of metal they got a different finish. For the golden parts I used Glorious Gold (VGC) and Silver (Vallejo Model Air) for the highlights. The shadows were painted with glazes of Sepia Ink.

For the iron parts the recipe was almost the same, I just left away the gold and the shadows were painted a lot darker with Chaos Black. To create the rust I used my own rust pigments.

On the skaven I wanted to create a really nice powerful red that would not totally get blown away by the strong color contrasts on the ogre.

For the red I used Blood Red which was darkened with adding Hawk Turquoise to the mix. The small light spots were painted with a mix of Blood Red and Dwarf Flesh. I brightened it even more with smaller spots of Dwarf Flesh and in the end the brigthest spots got a small dot of Ivory (VMC).

As rust is not a good contrast to the red armor I decided to create another type of oxidation effect with Hawk Turquoise. The cape was painted with Bleached Bone and Sepia Ink was again used for the shadows. The eye and crystal were painted with a strong contrast to the armor, Scorpion Green.

After the skaven was finished I started painting the base. I started glazing different brown tones including Sepia Ink and Tank brown on the basecoated bricks. To get a little color variation I glazed single bricks with terracotta. The lights on the bricks I painted with Rotting Flesh and white. To bring out single bricks I added shadows with Dark Sea Blue (VMC). I painted the metal parts like on the oger and added some home made rust. For the bright rust spots I used some pigments from MiG.

After the base was almost finished I used some pigments from Jester Miniatures to give the base some color variance and give it a dusty look on some parts. I just spotted the pigments on the base dry with a big bristle brush.

To bring some more life into the base I used different kind of rats from Games Workshop. Some of them got a little conversion work to give them more dynamic and running poses. To basecoat them I sticked them to some reversed sticky tape.

The rats were then painted one by one and glued on the base.

On the backside you can see one wild rat that will be going into berserker rage and attack the ogre soon :)



Finish
To bring the project to an end at this point, all that is missing is some socket label. Luckily I already wrote a tutorial about this specific label here :)

To add all those little waterfalls I used cut blister foil that were then bent and glued with super glue to the place. I then added some volume to the water with clear acrylic gel. There are other ways to create small waterfalls, like this. The waterfalls were then painted with colors from the Tamiya Clear series to make them look dirty.

After everything was finished i decided it would be a good idea to add some moss to the scene on some spots. I'm sorry i have no step by step pictures of this but there is a tutorial in our database and you can see it on the finished photos.

I hope you liked this step by step and you could get a little insight on the creation of a larger project. If you like to, you can donate to Massive Voodoo to motivate us :)
Thanks again to all my friends that supported me and especially Roman that had to listen to my bitching and whining all the time :)

To finish this article, again some pictures of the finished project.


Happy painting,
Raffa

Good Morning Musica

by Roman aka jar

posted by roman, jarhead, kong

Can you ...

by Roman aka jar

posted by roman, jarhead, kong

... find out what is happening here?


I know it looks like massive chaos, but what exactly is happening here?
Feel invited to throw your suggestions in the comments ...

Joy of Painting again

by Roman aka jar

posted by roman, jarhead, kong

A little teaser of my painting proces, one already finished - jippiieeeaayyyiieee!!





Also many thanks to Raffa as we lately did good photos of my Dungeon Base Work in Progress - i just love to have good photos of such a project once in a while to see where my eyes in real could not - hope you like it so far ... i am mostly proud of the magic ball the scorcerer has in hand. It was done pretty simple by using a small ball and mainly the same technique to do waterfalls - you now have to combine yourself :) - click to enlarge ...


Best Wishes out of the painting jungle!
Roman

Morning music...

by Mati

posted by Mati/Badsmile/lil Orangutan

Today, Jimmy Hendrix.



EPIC !

Joy of ebay

by Roman aka jar

posted by roman, jarhead, kong

Some new auctions arrived in the jungle - may they find a good new home - click on the banners to get directed to the auction and more information - all with a fair starting price of 0.99 $ - maybe one of those is your perfect match for your army:





Happy Bidding 
and thanks for your interest in the works of mine!

Ticking away ...

by Roman aka jar

posted by roman, jarhead, kong

The clock on the wall is ticking away ... tac, tic and I don't stop my happy painting and blogging rage :)

There is but one sad story to tell - I guess the summer is over now. My balcony is the best proof of that fact as there are some works going on at our roof soon and they already build up the framework - gna!


Ok, enough of my balcony with this stupid framework.
Back to Miniatures again.

I did finish another bunch of models lately - happy painting rage i told you. Most of the models are concepted for gaming and not painted in my highest standard as i did describe here. I am just painting these days and it is pretty stunning to me that i really can finish stuff with this happy painting rage :)

First there is a Warhammer Fantasy Tax Collector, who collects Taxes in the cities of the Empire. Hope you like him!

Imperial Tax Collector
Games Workshop, 28 mm


For sure every imperial Tax Collector is protected, well protected. The bodyguard of this Tax Collector is a real master at the sword but he doesn't talk much - this guy is called Sir Ricardo Garcia and is one fine bodyguard.

Sir Ricardo Garcia
Games Workshop, 28 mm


The last one to post is for sure a gaming piece - one of my planned and failed grey knight army soldiers finished to a quick end to have him ready for the battlefields.

Advancing Grey Knight 
Games Workshop, 28 mm


If you like to vote for them here you find the Imperial Tax Collector, Sir Ricardo Garcia and the Grey Knight. All models will hit ebay soon - if you want to make sure to get hold of one of them feel invited to write me an email at jarhead---at---massivevoodoo---dot---com for a quote and more information.

This feeling of getting things done is magnificant.Tac, tic and i don't quit :)
Happy Painting all around the workbenches!

Best Wishes
Roman